ETOMMENS 60V DC power supplies. Compare adjustable 0–60V supplies with low-current linear, compact 3A/5A, programmable switching and higher-current bench configurations up to 100A. Choose the output range, resolution, control interface and input requirements for your load.
Select a model below to view its specifications, choose the available product options and order online.
60V DC Power Supply Model Comparison
| Model | DC voltage range | Current range | Type / controls / display | Order online |
|---|---|---|---|---|
| eTM-L60D1SPL+ | 0–60V | 0–0.1A | Linear; 6-digit display; color screen | View Product |
| eTM-603DF | 0–60V | 0–3A | Linear; 4-digit display | View Product |
| eTM-605DF | 0–60V | 0–5A | Linear; 4-digit display | View Product |
| eTM-L603SPV+ | 0–60V | 0–3A | Linear; 6-digit display; VFD | View Product |
| eTM-L605SP+ | 0–60V | 0–5A | Linear; 6-digit display; blue screen | View Product |
| eTM-605MP | 0–60V | 0–5A | Switching / bench; See product display specification | View Product |
| eTM-605PL | 0–60V | 0–5A | Switching / bench; 4-digit display; color screen | View Product |
| eTM-K6010SP+ | 0–60V | 0–10A | Switching / bench; 6-digit display; blue screen | View Product |
| eTM-K6015SPL+ | 0–60V | 0–15A | Switching / bench; 6-digit display; color screen | View Product |
| eTM-6020C | 0–60V | 0–20A | Switching / bench; Two-knob; four-digit display | View Product |
| eTM-6030C | 0–60V | 0–30A | Switching / bench; Two-knob; four-digit display | View Product |
| eTM-6050C | 0–60V | 0–50A | Switching / bench; See product display specification | View Product |
| eTM-6060C | 0–60V | 0–60A | Switching / bench; Two-knob; four-digit display | View Product |
| eTM-60100C | 0–60V | 0–100A | Switching / bench; Two-knob; four-digit display | View Product |
Match the continuous output-power and input configuration to your operating voltage and current. The model ranges do not replace the complete permitted operating conditions.
60V Bench Power Supply Features
The L603 and L605 linear families cover 3A and 5A work, with five- and six-digit display choices. K6010 and K6015 switching models cover 10A and 15A; the 6010–60100 bench families address higher-current loads. Compact DP, MP, PL and F models provide different serial interfaces, presets and manual controls.
Use CV/CC regulation to set voltage and current limits for each working point. Low-ripple linear output, stored test sequences and higher current capacity are distinct selection benefits. Compare the complete model specification and configuration rather than treating every 60V supply as interchangeable.
Choose a 60V Supply for Your Test
- Low-ripple tests up to 3A: eTM-L603SPV+ lists 0–60V/0–3A linear output with a six-digit VFD display and voltage ripple ≤1mVrms. eTM-603DF provides another linear bench-control format.
- A 48V, 5A load: eTM-605MP and eTM-L605SP+ are 5A candidates with different architecture and sequence features. The load requires 240W.
- Programmed 10A or 15A tests: eTM-K6010SP+ and eTM-K6015SPL+ offer the respective current ranges and programmable control features. Select the interface and supported commands.
- A 48V, 50A or 60V, 100A load: eTM-6050C and eTM-60100C are current-range candidates. The loads require 2400W and 6000W; match the continuous-output and input configuration.
60V DC Power Supply FAQ
Which 60V supply can run a 48V, 5A load?
eTM-605MP and eTM-L605SP+ cover the ranges. The load requires 240W; choose between compact switching controls and linear programmable features.
Can a 60V supply be adjusted to 12V or 24V?
Yes, the listed 0–60V range is continuously adjustable. Select current capacity for the device and set the required voltage/current limit before enabling output.
Which 60V models support sequence testing?
eTM-L605SP+ and eTM-K6010SP+ list storage/recall of 100 voltage/current sets and Modbus/SCPI. Select the supplied communication interface and commands for your sequence.
Can I run 60V and 30A from the 110V input option?
eTM-6030C limits the 110–130V option to output power ≤1200W. That load needs 1800W, so choose an input/output configuration rated for it.
Is L603SPV+ a 3A or 5A supply?
eTM-L603SPV+ lists 0–3A in its detailed output specification. For a 5A requirement, compare an L605 model such as eTM-L605SP+.
Should I choose a five- or six-digit 60V model?
Choose the display resolution you need, then compare setting accuracy and ripple separately. Extra digits do not establish better accuracy or more current capacity.
Can a triple-output 60V model replace one 15A output?
eTM-DM-EEE lists three separate 60V/5A channels. This does not itself specify a single 15A output. Select a 15A single-output model for a stated 15A requirement.
Order Your 60V DC Power Supply
Open the matching model, choose its available product options and place your order online.
For selection help or a custom configuration: Email us · WhatsApp.
Browse our variable DC power supplies for other output ranges.